Core Orientation Frames
Setting up core in a frame permits not only measurement of individual structures but, importantly, allows the relationships between sets of structures in the same piece of core to be observed. Measurements can be constantly compared against the evolving geological model for the deposit as the core is being logged. Significant changes in attitude of structures can be identified and examined in more detail while the core is still laid out. Mistakes in measurement (or problems with the core orientation line) can be quickly spotted. In short, Core Orientation Frames are GEOLOGIST FRIENDLY. Even where the method of measuring internal core angles (alpha and beta) is being used a core frame must also be available in order to measure planes with high alpha angles. In addition, a core frame is the only way in which non-penetrative linear structures – such as fold axes – can be measured.
FEATURES:
- Folding core orientation frame with inbuilt azimuth and inclination scales.
- 80% of core surface available for observation and measurement
- Bottom of hole line visible from below for accurate positioning of core
- Supplied with SUUNTO™ A10 oil-filled compass with rotating bezel (NH or SH as required)
- Compact, lightweight and portable. Measures 38 x 8 x 7 cm. Weight: 900g.
- Easily fits into suitcase or backpack (wrap in a couple of old socks)
- Essential tool for every exploration geologist’s field kit
- Hand crafted from Australian hardwood, brass and rubber. Finished in 4 coats marine varnish
- Accepts core diameters BQ-PQ and lengths from 10-50cm. Accepts sawn half-core
For clarity in the illustrations, a wooden model of HQ diameter drill core (63.5mm) has been used. Surface lines mark bedding and an oblique penetrative cleavage. Brass rod marks the core axis.
Core sits proud of frame allowing for easy observation and measurement of 80% of core surface.
Bottom of Hole (BOH) line can be accurately positioned by sighting from below
THE MARJEX CORE FRAME
Designed and made by Roger Marjoribanks.
COST: AU$750 + GST *
* 10% Australian Government Tax. Not applicable on export sales
Enquiries to Roger Marjoribanks: see CONTACT ME Tab on Index Bar
For useful information on structural logging of drill core see Diamond Drilling and Structural Geology categories under BLOG Tab on Index Bar
DOWNLOAD INSTRUCTION MANUAL HERE
NOTE:
DYNAMICSGEX and WESTERNEX both manufacture supply core orientation frames. Try these links if you wish to compare features and prices with my model.